Schatten Design

RG-03 MKit Upgrade Kit with Powered Condenser Mic & 2 Channel Preamp

Schatten Design

RG-03 MKit Upgrade Kit with Powered Condenser Mic & 2 Channel Preamp

Existing RG-03 Owners - We haven't forgotten you. The RG-03 M Kit is an easy way to upgrade the sound of your resonator guitar.  The M Kit will also work well with other brands of pickups.

The RG-03 M Kit provides a condenser mic, 2 channel Mini Pre 2 preamp, TRS cable, several output jacks including a new endpin jack, and all the necessary installation materials.


Sandarac Ltd. is the registered distributor for Schatten Design Acoustic Pickups in the UK and Ireland. Trade enquiries welcome. Please contact us for details.


£0.00
£181.00

QTY

You’ll earn 0 reward points with this purchase.

The M powered condenser mic attaches to the well wall with the special mounting putty or with one of the supplied 3M VHB adhesive pads. The microphone mounting also has a through hole so that it can be attached to the well wall with a screw, if desired.

The Mini Pre 2 is a two channel outboard belt clip preamp. Channel One is used to preamp the RG-03 piezo sensor. Channel Two provides both the power for the condenser mic and preamps the mic signal as well. Input into the Mini Pre 2 is via a stereo 1/4" jack. Output from the Mini Pre 2 is via a mono 1/4" jack.

A soldering iron, a bit of solder and some basic hand tools are required for changing the jacks for the M Kits. Installation is straight forward and should take less than 45 minutes.

RG-03 M and M Kit Installation Instructions


You may also like