Schatten Design

C-12 Std Cello Pickup (Passive)

Schatten Design

C-12 Std Cello Pickup (Passive)

A pickup system when you need it. The C-12 Std installs in about 3 minutes and was designed to allow you to install and remove it quickly and easily. You don't have to change or modify the bridge on your cello in order to get a good sounding pickup. The C-12 Std is a combination of tremendous sound coupled with amazing response. This pickup is truly one of a kind.

The passive C-12 works perfectly well and sounds good when plugged straight into any decent quality guitar amp.  As with any pickup, the sound can be further enhanced with an outboard preamp. Note that a preamp will be needed for use when plugged directly into a mixer or P.A. system.

Sandarac Ltd. is the registered distributor for Schatten Design Acoustic Pickups in the UK and Ireland. Trade enquiries welcome. Please contact us for details.


£0.00
£145.00

QTY

You’ll earn 0 reward points with this purchase.

The piezo sensing unit is small and lightweight at only 1/8" thick, 1/4" wide, and 1 1/2" in length. It adheres to a cello bridge with a small amount of the special putty that comes supplied with the pickup. There is no acoustic degradation or loss of normal acoustic tone or volume. The pickup has excellent volume, and is strong and sweet throughout its' full dynamic range.

The C-12 Std comes ready to go and is pre-wired to a lightweight jack assembly that mounts quickly and securely between the center strings just above the tail piece. The jack assembly has a normal 1/4" output jack and takes a standard 1/4" guitar cable.

C-12 Std Installation Instructions